| Page Properties | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||
Resources & Remarks
Modification History
INGAs originial introduction: The following overview lists the system requirements for the operation of yuuvis®. The systems listed have been tested in the listed versions together with this release in the OPTIMAL SYSTEMS release tests and their compatibility has been ensured. yuuvis® uses standardized interfaces and integration technologies, meaning that yuuvis® also works with a wide range of older or more recent versions of the systems listed and with other unlisted systems. OPTIMAL SYSTEMS does not guarantee compatibility for systems not listed in the system requirements and performs its services subject to restrictions (in particular, no damage repair) in accordance with the prevailing maintenance contracts. In addition, OPTIMAL SYSTEMS guarantees compatibility with a listed system up until the date that the manufacturer guarantees regular (for example, not extended, expanded, individually agreed) support. Moreover, the minimum system requirements describe the system equipment needed for a productive yuuvis® system to provide adequate operational performance. This information is a set of non-binding guidelines. OPTIMAL SYSTEMS can only give a guarantee for a specific system environment on the basis of a customized hardware constellation. Likewise, it can be possible to still have full operational capability of the test systems, demo systems, or systems with only partially used functionality if the minimum system requirements are not reached. |
...
| Kubernetes Versions |
|---|
| 1.19 |
| 1.20 |
| 1.21 |
| 1.22 |
| 1.23 |
| 1.24 |
| 1.25 |
| 1.26 (as of 2022 Winter) |
Helm
Deployments for yuuvis® Momentum are offered via Helm Charts and thus require the installation of Helm. The supported versions are listed below.
...
| Elasticsearch Versions |
|---|
| 7.17.x (as of version 2023 Autumn) |
| 7.16.x (as of version 2022 Autumn) |
| 7.9.x (up to version 2022 Summer) |
| 7.3.x (up to version 2021 Winter) |
In order to operate Elasticsearch together with yuuvis® Momentum, the following plugins are additionally required. Please install a version that is supported by your Elasticsearch version.
- Intrafind Linguistic Plugin
- ICU Analysis Plugin
Anchor redis redis
Redis
In order to ensure synchrony in internal processes of yuuvis® Momentum, an in-memory data structure store is required. Our tested recommendation is Redis.
| Redis Versions |
|---|
| 6.0.9 |
| 7.0.4 (as of 2022 Autumn) |
Messaging Systems
yuuvis® Momentum uses the OASIS Advanced Message Queuing Protocoll (AMQP) Version 1.0 for internal messaging. The messaging systems of the corresponding versions listed below are tested with yuuvis® Momentum. Since RabbitMQ does not support AMQP Version 1.0, an additional plugin is required.
| Messaging System | Version | Additionally Required Plugin |
|---|---|---|
| ActiveMQ | 5.15.4 | - |
| RabbitMQ | 3.8.9 | rabbitmq_amqp1_0 |
Git
We strongly recommend to use Git as config store for yuuvis® Momentum, that acts as a version control system at the same time. In general, any git server should be sufficient. However, we tested the git servers listed below with the corresponding versions.
| Anchor | ||||
|---|---|---|---|---|
|
Authentication Provider
For operation of yuuvis® Momentum, an authentication provider is required. In general, any authentication provider supporting the OAuth 2.0 protocol can be combined with yuuvis® Momentum. However, we perform all our tests with Keycloak. The supported versions are listed below.
| Keycloak Versions |
|---|
| 7.0.0 |
| 10.0.2 |
| 11.0.2 |
| 15.0.2 (as of version 2022 Spring) |
| 19.0.2 (as of 2022 Winter) |
| 22.0.2 (as of 2023 Autumn) |
| Anchor | ||||
|---|---|---|---|---|
|
Storage
S3 Store
yuuvis® Momentum is working with an S3 directory that has to be connected via a service supporting the S3 protocol. All our tests are performed with MinIO, that can operate as store and as protocol service at the same time. It can also be used to connect an S3 store of a different provider to yuuvis® Momentum.
| MinIO Versions |
|---|
| RELEASE.2020-10-18T21-54-12Z |
...
| Provider | Version | Supported Protocols | Archive-Internal Retention |
|---|---|---|---|
| Cloudian | 7.2 | s3-based | supported |
| Hitachi Content Platform | 7.3.0.6 | s3-based | supported |
| iTernity Compliant Archive Software (iCAS) | 3.7 | iCAS | supported |
| As of 2022 Autumn: Dell EMC ECS (Elastic Cloud Storage) | DellECM-ECS-CE-3.7 | S3 | supported |
| As of 2023 Summer: Azure Blob Storage | Azure Blob Storage REST API | supported |
Additional Services
Anchor DeveloperLibraries DeveloperLibraries
| DeveloperLibraries | |
| DeveloperLibraries |
Libraries for Custom Clients
...
| Anchor | ||||
|---|---|---|---|---|
|
BPM Engine
Database
For operation of the BPM Engine, a database is required. Following providers and versions are supported:
...