Configure yuuvis® Momentum and the SAP system to properly operate the REPOSITORYMANAGER service.

Introduction

After installing the REPOSITORYMANAGER Service, further configurations of yuuvis® Momentum and the SAP system are required.

Configuring the App Schema

The REPOSITORYMANAGER service requires the repositorymanager app schema shown in the code block below. It is imported to yuuvis® Momentum via the endpoint POST /api/system/apps/{app}/schema.

The app schema contains the document object type definitions archiveLinkComponent and ilmObject.

Properties of 'archiveLinkComponent'

Objects of type archiveLinkComponent will be used both for documents (logical placeholders) and components (actual documents with content). It contains metadata related to ArchiveLink documents and ArchiveLink components.

Properties of 'ilmObject'

The objects of type ilmObject have the common ILM properties (URL and properties table), as well as a content length property and a type property.

Combination with Library-based Client

If a client application for yuuvis® Momentum is used that is based on our developer libraries, the IDs of properties and object types should be localized.
>> Localization for Clients

An example key-value mapping is shown in the following code block.

{
	"appRepositorymanager:Contentrepository_label": "Content Repository",
	"appRepositorymanager:ArchiveLinkversion_label": "Archive Link Version",
	"appRepositorymanager:Documentprotection_label": "Document Protection",
	"appRepositorymanager:DocID_label": "Document ID",
	"appRepositorymanager:Creationdate_label": "Creation Date",
	"appRepositorymanager:Creationtime_label": "Creation Time",
	"appRepositorymanager:Datelastmodification_label": "Last Modified Date",
	"appRepositorymanager:Timelastmodification_label": "Last Modified Time",
	"appRepositorymanager:Legalholdlock_label": "Legal Hold Lock",
	"appRepositorymanager:Expirationdate_label": "Expiration Date",
	"appRepositorymanager:Barcode_label": "Barcode",
	"appRepositorymanager:BarcodesenttoR3_label": "Barcode Sent to R3",
	"appRepositorymanager:CompID_label": "Component ID",
	"appRepositorymanager:Contenttype_label": "Content Type",
	"appRepositorymanager:Filename_label": "File Name",
	"appRepositorymanager:Applicationversion_label": "Application Version",
	"appRepositorymanager:Charset_label": "Chartset",
	"appRepositorymanager:Compressionstring_label": "Compression String",
	"appRepositorymanager:archiveLinkComponent_label": "ArchiveLink object type",
	"appRepositorymanager:archiveLinkComponent_description": "Type used for ArchiveLink documents and components",
	"appRepositorymanager:timestampProperties_label": "Timestamp properties",
	"appRepositorymanager:componentProperties_label": "Component properties",
	"appRepositorymanager:documentProperties_label": "Document properties",
	"appRepositorymanager:type_label": "Type",
	"appRepositorymanager:url_label": "URL",
	"appRepositorymanager:properties_label": "Properties",
	"appRepositorymanager:contentlength_label": "Content Length",
	"appRepositorymanager:ilmObject_label": "ILM object type",
	"appRepositorymanager:ilmObject_description": "Type used for ILM collections and resources"
}

Configuration of the KGS SAP Connector

Open the KGS Administration Page as described in the installation guide for the REPOSITORYMANAGER service. Go to Main > KGS SAP Connector.

An SAP connector is required for the RFC configuration later on.

In the Configuration Editor, configure a debug level between 0 and 4. For productive systems, value 0 is usually set.

The barcode scenario is set up with the following steps.

• Create a bridge connection via Main > KGS SAP Connector > Bridge Status > Generate Bridge.
  

• Create a connection via Main > KGS SAP Connector > Add config.
  

• Edit the connection via Main > KGS SAP Connector > Edit. The following information needs to be entered: Description, SAP AS Host, SAP System Number, SAP Client, SAP User, SAP User Password, SAP Language
  
• Configure the repositories via Main > Contentserver4ArchiveLink > Edit and adjust the values in the following tabs:
  • License - Specify the KGS-license key.
  • Barcode - Tick the Enable Barcode checkbox.
  • Protocol - For normal work mode, untick all checkboxes.
  • Common - Adjust only the debug level if necessary.
  • Security
    • Configure the default security level for the communication between SAP and embedded tomcat:
      0 - certificate is not used
      1 - certificate is used, but not validated
      2 - certificate is used and validated
      We recommend level 2 for productive systems.
    • Specify the clients that should be allowed to change the certificate via Allowed CSAdmin Clients. Avoid the use of a wildcard. Specify only the needed IP addresses instead.
  • RFC - Choose one of the connections you configured before.
  • Components - Usually no changes needed. In case you see a need, please contact your OS or KGS consultant.
  • Backend - Usually no changes needed. In case you see a need, please contact your OS or KGS consultant.
  • Content - Usually no changes needed. In case you see a need, please contact your OS or KGS consultant.
  • Index Export - If barcode upload is used, the time period for requesting new barcodes can be adjusted here. Please ensure that the period in productive systems is long enough to avoid overlapping runs (1800 s recommended). 
  • ILM - Set ILM for the ILM Repository. Enter the user name and password of an existing SAP account that should be used for the connection.
• Assign a configuration at repository level or global level via Main > ContentServer4ArchiveLink > Edit > RFC > RFC Connection Name. The barcode configuration you create will be assigned. To use barcode synchronization from multiple SAP systems, remove any global barcode configuration and use the configuration at repository level instead.
  • Repository level:
    
  • Global level:
    
• Enable barcode via Main > ContentServer4ArchiveLink > Edit Configuration > Barcode > Enable barcode.
  
• Define the barcode timer via Main > ContentServer4ArchiveLink > Edit Configuration > Index Export > BarcodeTimer. Recommended: 60 (seconds)
  
• SAPMimeExtensionLookup needs to be enabled to be able to correctly assign file formats to document types. Enable SAPMimeExtensionLookup via Main > ContentServer4ArchiveLink > Edit Configuration > Common > SAPMimeExtensionLookup
  

Configuration of the SAP System

To connect the SAP system with the HTTP content server and make all necessary settings, we recommend following the SAP guidelines using the SPRO transaction under Netware > Application Server > Basis Services > ArchiveLink.

To customize the interface for print lists and outbound documents, we recommend attending the SAP course BIT615. To file reorg data, we recommend attending the SAP course BIT660.

The main transactions required to establish a connection are listed below:

Transaction OAC0 defines one or several repositories.

This and all further activities within the SAP system have to be carried out by the SAP system administrator or another authorized user of the customer.

These activities include:

• For the first time:

  • Creation of a communication user (SU01) with the corresponding authorizations (SAP_BC_ENDUSER, SAP_BC_SRV_ARL_ADMIN, SAP_BC_SRV_ARL_USER, SAP_BC_SRV_COM_ADMIN)

  • ArchiveLink: maintenance of basic settings (OAG1)

  • Creation of number range intervals (OANR) for print lists

  • Create log (OAA3) or import prepared transports from OPTIMAL SYSTEMS with the log.

  • Creation of an archive device (name ARCH) as output device (SPAD), assignment of the SAP ArchiveLink archiver, hostspool access method (I: archiver)

• One or several times; depending on how many content repositories have to be defined:

  • Creation of a content repository (OAC0)
    DocArea – ArchiveLink
    Filing method – HTTP content server
    Log – OPTIMALA
    Version no. – 0046 or 0047
    http script – cs/contentserver
    Output device – ARCH
    HTTP server – name or IP address of the server on which yuuvis® Momentum REPOSITORYMANAGER is running
    Port number – The port used to access yuuvis® Momentum REPOSITORYMANAGER (default: 8010).

  • After successful configuration of yuuvis® Momentum REPOSITORYMANAGER, the certificate (OAC0/CSADMIN) has to be sent and activated for each repository.

Summary

The REPOSITORYMANAGER service uses properties and object types that are defined in a separate app schema. If a library-based client is used, the corresponding property and object type IDs have to be localized in order to replace the technical terms in the graphical user interface of the client application. Furthermore, the SAP system needs some manual configuration.